Konica Minolta bizhub PRESS C1085 - Manual (Page 104)

Convenient Use of Scan Function (Scan to SMB) 8
8-10 bizhub PRESS C1100/C1085
8.3
8.3 Convenient Use of Scan Function (Scan to SMB)
You can send the scanned original data as an E-mail attachment, or send it to a shared computer (SMB serv-
er) or the FTP server.
This section describes the function (Scan to SMB) to send data to the SMB server.
SMB transmission is a function that converts the original data scanned on this machine to a computer-com-
patible file and sends the converted data to a target computer or a shared folder on the server. You can store
a handout original as digital data using this function.
Also, you can send data to your computer and the file server used for daily file transfer in order to share it.
Tips
- Mac OS X 10.7 or later does not support the Scan to SMB function. Instead, use Scan to FTP. For de-
tails, refer to the [HTML User's Guide].
Step 1: Prepare the destination computer
In Step 1, execute the following tasks:
- To check the destination computer name and accessible user name.
- To create a destination folder and to configure a sharing setting.
In a Windows environment.
Tips
- To carry out this task, the computer's administrator privilege is required.
1
Check [Computer name] in [System Properties].
% To display [System Properties], right-click [Computer], then click [Properties].
% The computer name is required to specify a destination. Write down the computer name so that you
do not forget it.
% In Windows XP, you can check the user name in [System Properties].
2
Check the user name.
% For Image Controller IC-308 or Image Controller IC-310, "computer name (or domain name)\user
name" is required.
% In Windows 7/Windows Vista/Windows Server 2008 R2/Windows Server 2008/Windows XP/Win-
dows Server 2003, select [All Programs] - [Accessories] and open [Command Prompt]. Then, type
in "set user" and press the [Enter] key. In Windows 8, right-click the Start window, click [All apps],
and open [Command Prompt]. Then, type in "set user", and press the [Enter] key. The domain name
and user name are displayed. The login user name is shown following USERNAME =.
% The user name is required to specify a destination. Write down the user name so that you do not
forget it.