Konica Minolta bizhub PRESS C1085 - Manual (Page 71)

bizhub PRESS C1100/C1085 6-21
6.2 Image Quality Adjustment 6
6.2.4 Executing calibration using the image controller
This section describes how to carry out calibration for daily maintenance using Fiery Command WorkSta-
tion and a colorimeter (EFI Spectrometer ES-1000).
Tips
- This section describes how to carry out calibration when using coated paper as an example.
1
Use a USB cable to connect EFI Spectrometer ES-1000 to your computer.
For information about EFI Spectrometer ES-1000 setting and adjustment, refer to the manual supplied
with this machine.
2
Start Fiery Command WorkStation.
For information about how to start this application, refer to page 4-9.
3
Click [Job Center] - [Calibrate] in sequence.
Calibrator starts.
4
Select the printing preferences for calibration.
% Calibrate: Coated Paper
% Paper source: Paper tray with coated paper
loaded
% Measurement method: EFI ES-1000
NOTICE
This section describes how to specify a printing
environment when using coated paper as an ex-
ample. Specify a printing environment accord-
ing to the paper and tray actually used.