Kodak ESP Office 6150 - Manual (Page 49)

www.kodak.com/go/aiosupport 43
KODAK ESP Office 6100 Series All-in-One Printer
Rings to Answer 1 to 6 (default is 4) The number of times that your phone
will ring before the fax picks up the call.
If you use a dedicated phone line for your
printer, set the Rings to Answer to any
setting. If the printer shares the phone
line with an answering machine, set the
Rings to Answer to a higher number (5
or 6) than the rings to answer for the
answering machine (typically 4 rings).
This allows the answering machine to
pick up phone calls. The printer will
monitor the line after the answering
machine picks up, and, if set to Auto
Answer, will detect an incoming fax and
receive it.
Redial if No Answer Yes (default) / No If the number you call is busy, the printer
will redial the number once
automatically.
Busy Redial
Attempts 0 to 12
(default is 5)
The number of times that the fax will
attempt to redial a busy number.
Disable Call Waiting No (default) / Yes If you have call-waiting service on your
phone line, you can disable it so that an
incoming call does not interrupt your fax
transmission.
Select Yes to disable call waiting, then
enter the call waiting disable code
(below).
Call Waiting Disable
Code *70 (default) The printer automatically dials the call
waiting disable code before dialing the
number to which you are sending a fax.
This code disables call waiting for the
duration of the fax, preventing incoming
calls from interrupting your fax
transmission.
The usual code to disable call waiting is
the default *70. If the call waiting disable
code is different in your area, press
OK,
then press to erase the current code.
Use the keypad to enter the correct
code, then press
OK.
NOTE: You must enable call waiting
manually after your fax
transmission.
Fax Option Settings Description