Kodak ESP Office 6150 - Manual (Page 16)

Networking Your Printer
10 www.kodak.com/go/aiosupport
Printing the network configuration
To print the current network configuration:
1. Load plain paper into the printer. (See Loading plain paper, page 16 .)
2. Press Home .
3. Press to select Network Settings , then press OK .
4. Press to select Print Network Configuration , then press OK .
Installing your printer on additional computers on the network
To add your printer to another computer(s) on your network, install the KODAK
All-in-One Printer Software on each computer. Go to
www.kodak.com/go/aiodownloads and follow the on-screen instructions.
Connecting to another KODAK All-in-One Printer
If you are connecting to a newer model printer (for example, you have an ESP 7
printer and now you are adding an ESP Office 6150 printer), you must install the
software for the newer model.
If you are connecting to another ESP Office 6150 printer or to a previous model:
On a computer with WINDOWS OS:
1. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility .
• If your wireless all-in-one printer (example: KodakESP6100+1133) is not
listed:
a. Select No, my printer is not listed , then click Next .
b. From the drop-down list, select your printer.
c. Select Network - Wireless / WiFi , then click Next .
When your printer is detected, driver installation begins.
• If your wireless all-in-one printer (example: KodakESP6100+1133) is listed:
a. Highlight the all-in-one printer that is connected to your network.
b. Select Yes, my printer is listed , then click Next .
When your printer is detected, driver installation begins.
2. When driver installation is complete, click Done .
On a computer with MAC OS:
1. Select Apple > System Preferences .
2. Under Hardware, select Print & Fax .
3. In the Print & Fax dialog box, click + .
4. Select your printer from the list, then click Add .