Kodak ESP Office 6150 - Manual (Page 15)

www.kodak.com/go/aiosupport 9
KODAK ESP Office 6100 Series All-in-One Printer
To set up your IP address on the printer:
1. Press Home .
2. Press to select Network Settings , then press OK .
3. Press to select Advanced IP Address Setup , then press OK .
4. Press OK again to continue.
5. Select one of the following, then press OK :
• Dynamic (DHCP)
• Automatic (Private)
• Manual (Static)
6. If you selected Manual (Static) , you are prompted to enter an IP address, a
Subnet Mask, a Gateway Address, and a DNS Server address. Press OK after
each entry. Use the navigation buttons to enter each digit of the numbers.
Consult your Internet service provider or network administrator for more
information.
Viewing the network configuration
To view the network configuration and verify that you are connected to your wireless
network:
1. Press Home .
2. Press to select Network Settings , then press OK .
3. Press to select View Network Configuration , then press OK .
The wireless or Ethernet network settings appear on the LCD, including:
• Printer Hostname
• Connection
• Speed
• IP Address
• IP Address Type
• Network Subnet
• Connected Network SSID
• Security
• Authentication
• Channel
• Region
• Radio (on/off)
• MAC Address
If the printer is connected to your network, you will see the network name and
the word CONNECTED.
4. To scroll through the information, press .
5. When you are done, press OK .