Apple Color LaserWriter 12/600 PS - Manual (Page 76)

2 If rlp is running—that is, you saw one or more lines of text in step 1—kill the process
by typing
kill -15 process_number_ from_step_1
3 Make sure the following entry is in the /etc/inetd.conf file:
printer stream tcp nowait root
/usr/lib/rlpdaemon rlpdaemon -i
This line tells inetd to start the rlp daemon automatically when a print
request is made (if it’s not already running).
4 Make sure the following entry is in the /etc/services file:
printer 515/tcp spooler
5 Start inetd by typing the following command at the UNIX prompt:
/etc/inetd -c
6 Repeat the steps in “Configuring HP-UX Version 8.07.”
Configuring HP-UX version 9.x
You must configure the printer as a remote printer, not as a network printer.
1 Log in to the system console as root .
The System Administration Manager (SAM) uses a screen-oriented interface
that works best at the console.
2 Assign an IP address and IP name to the printer, as described in “Step 3: Assigning an
IP Address to the Printer,” earlier in this chapter.
3 Make sure the printer’s IP name and IP address are entered in the /etc/hosts file.
4 Run the SAM utility by typing sam at the UNIX prompt.
62 Chapter 4