Apple Color LaserWriter 12/600 PS - Manual (Page 129)

Using a hard disk
You can add an external hard disk to the printer. A hard disk can store many
soft fonts so they don’t need to be downloaded each time you use them, thus
expediting your printer. Chapter 5 of the Color LaserWriter 12/600 PS User’s
Manual explains how to install a hard disk.
Adding a hard disk to the device list
1 From the Program Manager, open the Control Panel.
2 Double-click the Printers icon.
The Printers dialog box appears.
3 If it is not already selected, select the Color LaserWriter 12/660 PS from the Installed
Printers list.
4 Click Setup.
The Setup dialog box appears.
Note: You can also open the Setup dialog box from within many Windows
programs. Check your program documentation to see if you can change your
printer setup from within your program.
5 Click Fonts.
6 Click Font Downloader.
The Font Downloader dialog box appears.
7 Click Device Installer.
A dialog box opens.
8 Click Add New.
Another dialog box opens.
9 Make sure “Magnetic disk” is selected, then click Add.
115 Windows 3.1 and DOS Users