2 sv-301xl (u.s.), Sv-301xl (u.s.), Table 2: sv-301xl (u.s.) front and rear view – Kramer Electronics SV-307 User Manual
Page 8

Defining the Wall Plates (U.S. Versions)
5
4.2 SV-301xl (U.S.)
The SV-301xl is a single-gang wall plate insert and has an RJ-45 connector at the
rear and a power connector on the side. EDID information can be stored in the wall
plate by using the FC-200 XGA EDID Copier Kramer Tool (see the FC-200 XGA
defines the front and rear views of the
SV-301xl.
Table 2: SV-301xl (U.S.) Front and Rear View
SV-301xl Front View
SV-301xl Rear View
#
Feature
Function
1
ON LED
Lights red when receiving power (when no signal is
detected); lights green when receiving a signal
2
COMPUTER IN 15-pin HD Connector Connect to the computer graphics source
3
AUDIO IN 3.5mm Mini Connector
Connect to the audio source
4
RJ-45 Connector
Connect to the SV-551/SV-552 Processor/Controller
5
DC IN Power Connector
Connect to an optional 12V power supply
defines the SV-301xl as an example, in its plastic frame.
Figure 1: Wall Plate (U.S.) Enclosed in its Plastic Frame
3F
1
1 Each model that is designed specifically for the U.S. market can be mounted inside a plastic frame