Kramer Electronics SV-307 - Manual (Page 2)

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Recycling Kramer Products 1
3 Overview 2
3.1 Shielded Twisted Pair and Unshielded Twisted Pair 3
4 Defining the Wall Plates (U.S. Versions) 3
4.1 SV-301 (U.S.) 4
4.2 SV-301xl (U.S.) 5
4.3 SV-302 (U.S.) 6
4.4 SV-303 (U.S.) 7
4.5 SV-304 (U.S.) 8
4.6 SV-305 (U.S.) 9
4.7 SV-306 (U.S.) 10
4.8 SV-307 (U.S.) 11
5 Defining the Wall Plates (U.K. and Europe) 12
5.1 SV-301 (U.K. and Europe) 12
5.2 SV-301xl (U.K. and Europe) 13
5.3 SV-302 (U.K. and Europe) 14
5.4 SV-303 (U.K. and Europe) 15
5.5 SV-304 (U.K. and Europe) 16
5.6 SV-305 (U.K. and Europe) 17
5.7 SV-306 (U.K. and Europe) 18
6 Wiring the Rear Wall Plate Connectors 19
6.1 Wiring the TP Line In/Line Out RJ-45 Connector 20
6.2 Wiring the U.K. and European Terminal Blocks 20
7 Grounding the Wall Plate 21
8 Wall Plate and Switcher Compatibility 22
9 Summary of Recommended Cables 22
9.1 Cabling for the SV-306 and SV-307 23
Tables
Table 1: SV-301 (U.S.) Front and Rear View 4
Table 2: SV-301xl (U.S.) Front and Rear View 5
Table 3: SV-302 (U.S.) Front and Rear View 6
Table 4: SV-303 (U.S.) Front and Rear View 7
Table 5: SV-304 (U.S.) Front and Rear View 8
Table 6: SV-305 (U.S.) Front and Rear View 9
Table 7: SV-306 (U.S.) Front and Rear View 10