2 sv-301xl (u.k. and europe), Sv-301xl (u.k. and europe), Defining the wall plates (u.k. and europe) – Kramer Electronics SV-307 User Manual
Page 16: Front and rear view
Defining the Wall Plates (U.K. and Europe)
13
5.2 SV-301xl (U.K. and Europe)
Front and Rear View
The SV-301xl is a single-gang wall plate and has a terminal block at the rear.
EDID information can be stored in the wall plate by using the Kramer FC-200
XGA EDID Copier (see the FC-200 XGA EDID Copier User Manual).
defines the front and rear views of the SV-301xl.
Table 10: SV-301xl (U.K. and Europe)
SV-301xl Front View
Front and Rear View
SV-301xl Rear View
#
Feature
Function
1
ON LED
Lights red when receiving power (when no signal is detected);
lights green when receiving a signal
2
COMPUTER IN 15-pin HD
Connector
Connect to the computer graphics source
3
AUDIO IN 3.5mm Mini
Connector
Connect to the audio source
4
Ground Connection
Ring tongue terminal and grounding screw
5
Terminal Block
Connect to SV-551/SV-552 Processor/Controller
6
GND +12V 2-pin Power
Terminal Block
Connect to an optional 12V power supply
1 When mounting in Belgium and Germany, use the standard WP Adapter
2 Some models may have a DC IN connector