Kramer Electronics VS-169TP - Manual (Page 8)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
4
3 Overview
The VS-169TP is a high-performance matrix switcher for video signals up to
WUXGA/1080p, analog stereo / S/PDIF audio and bidirectional RS-232
signals, over twisted pair CAT 5 cable. The unit can route any input to any or
all outputs simultaneously.
More specifically, the VS-169TP features:
•
Compatibility with most Kramer twisted pair transmitters/receivers
• 16 inputs for remote connection to CAT 5 transmitters and eight outputs
for remote connection to CAT 5 receivers
• Two switchable local inputs (built-in transmitters) and one local output (a
built-in receiver) allowing direct connection of the signals (UXGA, audio
and RS-232) for the units located near to the switcher
• Follow or breakaway switching for all signals (UXGA, audio, RS-232)
• 48kHz/24-bit analog/digital conversion for broadcast quality stereo audio
• Baud rate of up to 19,200 for full-duplex RS-232 together with audio; one
source to multiple destination for straight RS-232 signal and priority
system or user-defined destination for reply signal
• Four-line LCD display for separate route indication of video, audio, or
RS-232
• Control via front panel pushbuttons, RS-232, RS-485, IP and IR remote
control
• 15 user-programmable presets for quick-change configurations
• Kramer 2000 communication protocol
• 100-240V AC worldwide power supply
• Standard 19” rack mount size – 2U