Kramer Electronics VS-169TP - Manual (Page 24)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Control the VS-169TP 16x9 CAT 5 Matrix Switcher
20
6. Select Use the following IP Address, and fill in the details as shown in
Figure 9.
7. Click OK.
Figure 9: Internet Protocol (TCP/IP) Properties Window
7.3.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through
Cable)
You can connect the Ethernet port of the VS-169TP to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45
connectors.
7.3.3 Control Configuration via the Ethernet Port
To control several units via the Ethernet, connect the unit (Machine # 1) via
the Ethernet port to the LAN port of your PC. Use your PC initially to
configure the settings.