11 technical specifications, 12 hex table – Kramer Electronics VS-169TP User Manual
Page 37
Technical Specifications
33
11 Technical Specifications
The
VS-169TP technical specifications are shown in Table 6:
Table 6: VS-169TP Technical Specifications
1
SIGNAL INPUTS:
16 CAT 5 remote transmitters on RJ-45 connectors
2 local RGBHV UXGA on 15-pin HD connectors
2 local stereo analog audio on 3.5mm mini connectors
2 local RS-232 controllers on 9-pin D-sub connectors
SIGNAL OUTPUTS:
8 CAT 5 remote receivers on RJ-45 connectors
1 local RGBHV UXGA on a 15-pin HD connector
1 local stereo analog audio on a 3.5mm mini connector
1 local RS-232 controllers on a 9-pin D-sub connector
CONTROL INPUTS/OUTPUTS:
1 RS-232 Input on a 9-pin D-sub connector
1 RS-232 Output on a 9-pin D-sub connector
1 RS-485 Input/Output on a 3-pin detachable terminal block
1 Ethernet Input/Output on an RJ-45 connector
RESOLUTION (VIDEO):
Up to WUXGA; HD compatible
SAMPLE RATE (AUDIO):
24bit, 48kHz
BAUD RATE (RS-232):
Up to 19200
CONTROL (LOCAL VIDEO OUT): EQ: 0 to +33dB @50MHz; Level: -7.5dB to +4.4dB; H & V polarity
S/N RATIO (AUDIO):
>80dB
THD+N (AUDIO):
< 0.03%
OPERATING TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
–40° to +70°C (–40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
POWER SOURCE:
100-240VAC, 50-60Hz; 36VA (500mA maximum)
DIMENSIONS:
19" x 7" x 2U W, D, H
WEIGHT:
3.8kg (8.4lbs) approx
ACCESSORIES:
Power cord, rack “ears”, Windows®-based control software, remote control
transmitter
OPTIONS:
External remote IR receiver cable
12 Hex Table
lists the Hex values (which the protocol in
describes in
more detail) for the
VS-169TP:
1 Specifications are subject to change without notice