Kramer Electronics VS-162AVM - Manual (Page 9)

Your Audio-Video Router
5
5
The VS-162AVM can be controlled:
• Using the front panel buttons
• Remotely, by RS-485 or RS-232 serial commands transmitted by
a touch screen system, PC, or other serial controller
• Remotely, from the Kramer RC-IR3 Infrared Remote Control
Transmitter
• Via external contact closure push buttons
To achieve the best performance:
• Use only good quality connection cables 1
• Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
VS-162AVM away from moisture, excessive sunlight and dust
to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables).
4 Your Audio-Video Router
Figure 1 illustrates the front and rear panels of the VS-162AVM. Table 1
and Table 2 define the front and rear panels of the unit.
1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com