Kramer Electronics VS-162AVM - Manual (Page 41)

MENU Commands
37
37
1. Press the MENU button twice.
The MATRIX display shows the message:
Follow the SYSTEM
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The displays show the messages:
set UNIT follow SYSTEM?
Press TAKE to execute
current:
breakaway
3. Press the TAKE button again.
The MATRIX display momentarily shows this message, followed by the
status of the switcher and in the STATUS display the letter “S” is displayed
behind the flashing cursor:
the UNIT is set in mode
FOLLOW system
If the status of the unit differs from that of the other unit(s), set the unit to the
Follow-SYSTEM mode. The MATRIX display flashes the new status of the
switcher and the TAKE LED flashes. Pressing the TAKE button 1
To set the unit to function in the Breakaway-from-SYSTEM mode:
implements all the changes to the same state as the rest of the system
placing the switcher in the Follow-SYSTEM mode.
1. Press the MENU button twice.
The MATRIX display shows the message:
FOLLOW the system
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The displays show the messages:
BREAKAWAY from system?
Press TAKE to execute
current:
follow SYS
3. Press the TAKE button again.
The MATRIX display shows the message:
the UNIT is set in mode
BREAKAWAY from system
1 Pressing a different button cancels the operation and the switcher remains in its previous state