Kramer Electronics VP-885 - Manual (Page 45)

Technical Specifications
41 41
12 Technical Specifications
Table 7 lists the technical specifications for the VP-885.
Table 7: Technical Specifications 1
INPUTS:
for the VP-885
5x8 composite video 0.7Vpp/75 Ω and S/PDIF digital audio or s-Video
0.7Vpp/75 Ω (Y), 0.7Vpp/75Ω (C); and component video 0.7Vpp/75Ω on
BNC connectors
8 balanced stereo audio, 2.2V/10kΩ on detachable terminal blocks
1 External Sync 2
OUTPUTS:
1Vpp on a BNC connector
5x8 composite video 0.7Vpp/75 Ω and S/PDIF digital audio or s-Video
0.7Vpp/75 Ω (Y), 0.7Vpp/75Ω (C); and component video 0.7Vpp/75Ω on
BNC connectors
8 balanced stereo audio, 2.2V/150 Ω on detachable terminal blocks
MAX. OUTPUT LEVEL: VIDEO: 2.4Vpp (RGB) AUDIO: 15Vpp @max gain
BANDWIDTH (-3dB): VIDEO: 350MHz, Fully Loaded AUDIO: 22kHz @-3dB
S/N RATIO: VIDEO: 74dB AUDIO: 81dB @1kHz
CROSSTALK (all hostile): VIDEO: –47dB @ 5MHz AUDIO: <–57dB @20kHz
DIFF. GAIN 0.05
DIFF. PHASE 0.05
CONTROLS: Manual, RS-232, RS-485 or ETHERNET
AUDIO THD + NOISE: 0.089%@1kHz
POWER SOURCE: 100 - 240VAC, 50/60Hz, 23VA
DIMENSIONS: 48.26cm x 17.78cm x 3U (19" x 7" x 3U)
WEIGHT: 5.5kg (12.2lbs) approx.
ACCESSORIES: Power cord, Windows®-based Kramer control software
OPTIONS: External remote IR receiver cable 3
1 Specifications are subject to change without notice
2 The sync input cannot accept video signal level
3 P/N: C-A35M/IRR-50