3 confirming settings, 1 toggling between at once and confirm modes, 2 confirming a switching action – Kramer Electronics VP-885 User Manual

Page 24: Confirming settings, Toggling between at once and confirm modes, Confirming a switching action, On 7.3

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Operating the VP-885

To disconnect all outputs:

•

Press the ALL button, followed by the OFF button

7.3 Confirming Settings

You can choose to work in the At Once or the Confirm mode. When the

VP-885 operates in the At Once mode, pressing an output-input combination

implements the action immediately. In the Confirm mode, the TAKE button

must be pressed to activate the switch.

The At Once Mode

In the At Once mode, execution is immediate and actions require no user

confirmation. However, no protection is offered against changing an action in error.

The Confirm Mode

In the Confirm mode:

•

You can enter several actions and then confirm them by pressing the

TAKE button to simultaneously activate the multiple switches

•

Every action requires user confirmation which protects against erroneous

switching

•

Execution is delayed

7.3.1 Toggling between At Once and Confirm Modes

until the user confirms the action

To toggle between the At Once and Confirm modes:

1. Press the TAKE button to toggle from the At Once mode

to the Confirm

mode

2. Press the TAKE button to toggle from the Confirm mode back to the At

Once mode.

Actions no longer require user confirmation and the TAKE button no

longer lights.

Actions now require user confirmation and the TAKE button lights.

7.3.2 Confirming a Switching Action

To confirm a switching action (in the Confirm mode):

1. Press an output-input combination.

The corresponding input number that is displayed in the STATUS

7-segment display flashes. The TAKE button also flashes.

1 If the TAKE button is not pressed within one minute, the action is aborted
2 The TAKE button does not light
3 The TAKE button lights