beautypg.com

2 connecting to the vp-885 via rs-232, Connecting to the vp-885 via rs-232, Figure 5: wiring an unbalanced stereo audio output – Kramer Electronics VP-885 User Manual

Page 16: Figure 5, Figure 6

background image

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting the VP-885

12

Figure 5: Wiring an Unbalanced Stereo Audio Output

Figure 6

illustrates how to wire an unbalanced source to the balanced input.

Figure 6: Wiring an Unbalanced Source to a Balanced Input

6.2 Connecting to the VP-885 via RS-232

You can connect to the VP-885 via an RS-232 connection using, for example,

a PC. Note that a null-modem adapter/connection is not required.

Figure 7: Connecting to the VP-885 via RS-232 using a PC

To connect to the VP-885 via RS-232 as illustrated in Figure 7:

•

Connect the RS-232 9-pin D-sub rear panel port on the VP-885 unit via a

9-wire straight cable (pin 2 to pin 2, pin 3 to pin 3, pin 5 to pin 5) to the

RS-232 9-pin D-sub port on your PC

See also other documents in the category Kramer Electronics Routers: