Kramer Electronics VP-885 - Manual (Page 25)

Operating the VP-885
21 21
2. Press the flashing TAKE button to confirm the action.
The corresponding input number that is displayed in the STATUS
7-segment display no longer flashes. The TAKE button lights.
To confirm several actions (in the Confirm mode):
1. Press each OUTPUT-INPUT combination in sequence.
The corresponding input numbers that are displayed in the STATUS
7-segment display flash. The TAKE button also flashes.
2. Press the flashing TAKE button to confirm all the actions.
The TAKE button lights and the corresponding input numbers that are
displayed in the STATUS 7-segment display no longer flash.
7.4 Defining the 7-Segment Status Display Information
The VP-885 has three display modes:
• Immediately after the power is turned on (see Section 7.4.1
• During normal operation (see
)
Section 7.4.2
• During Audio Gain Level Setting (see
)
Section 7.4.3
7.4.1 Status Display Immediately After Power is Turned On
)
Immediately after the unit is turned on, the status display shows:
1. The firmware version (major, minor, and revision) for the first five
seconds (see Figure 14 )
Figure 14: Status Display Immediately After Turn On
2. The firmware build number and machine number for the following five
seconds (see Figure 15 ).