Kramer Electronics VP-885 - Manual (Page 28)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-885
24
Figure 18: Configuration Button Numbering
7.6.1 Storing an Input-Output Configuration
To store the current status in memory:
1. Press the STO button.
The STO button flashes.
2. Press one of the INPUT/OUTPUT SELECTOR buttons from 1 to 8. This
is the setup number in which the current status is stored.
The memory stores the data at that reference.
7.6.2 Recalling an Input-Output Configuration
To recall an input-output configuration, do the following:
1. Press the RCL button.
The RCL button flashes.
2. Press the appropriate INPUT/OUTPUT SELECTOR button (the INPUT
SELECTOR button number corresponding to the setup number).
The memory recalls the stored data from that reference.
7.6.3 Deleting an Input-Output Configuration
To delete an input-output configuration:
1. Press the STO and RCL buttons simultaneously.
The STO and RCL buttons flash.
2. Press the appropriate INPUT SELECTOR button.
The specific input-output configuration is erased from the memory,
leaving it empty and available 1
7.7 Audio Input/Output Gain Control
.
The audio gain control is configured when the machine is in the AUDIO or
AFV mode.
The default audio gain level for all inputs and outputs is 0dB. Each input or
output can be set independently.
1 Storing a new configuration over a previous configuration (without deleting it first) replaces the previous configuration