Kramer Electronics VP-885 - Manual (Page 44)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Communication Parameters
40
11 Communication Parameters
Table 6 lists the communication parameters as used in Kramer Electronics
products.
Table 6: Communication Parameters
RS-232
Protocol 2000 Protocol 3000 (Default)
Baud Rate: 9600 Baud Rate: 115,200
Data Bits: 8 Data Bits: 8
Stop Bits: 1 Stop Bits: 1
Parity: None Parity: None
Command Format: HEX Command Format: ASCII
Example (Output 1 to Input 1): 0x01, 0x81, 0x81, 0x81 Example (Output 1 to Input 1): #AV 1>1
Switching Protocol
P2000 -> P3000 P3000 -> P2000
Command: 0x38, 0x80, 0x83, 0x81 Command: #P2000
Front Panel: Press and hold Output 1 and
Output 3 simultaneously
Front Panel: Press and hold Output 1 and
Output 2 simultaneously
Ethernet
Default Settings Reset Settings
IP Address: 192.168.1.39
Subnet mask: 255.255.255.0
Gateway: 192.168.1.1
Power cycle the unit while holding in the Factory Reset button, located on
the rear panel of the unit.
TCP Port #: 5000
UDP Port #: 50000