Kramer Electronics VP-885 - Manual (Page 26)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-885
22
Figure 15: Status Display 5 Seconds After Turn On
7.4.2 Status Display During Normal Operation
During normal operation, the STATUS display shows which inputs are
switched to which outputs (see Figure 16 ).
Figure 16: Status Display During Normal Operation
In the VIDEO mode, the display shows the video signal configuration. In the
AUDIO mode, the display shows the audio signal configuration. In the AFV
mode (see Section 7.5.1 ), the display shows both signal configurations.
7.4.3 Status Display During Audio Gain Level Setting
During audio gain level setting, the Status display indicates:
• Whether an INPUT or OUTPUT is selected (in this example, OUTPUT)
• Which channel number is selected (in this example, 3)
• The current gain setting in 0.5dB increments (in this example, -4.5). The
0.5dB is indicated by the period following the 4.
Figure 17: Status Display Showing OUTPUT 3, Gain -4.5