Kramer Electronics VP-885 - Manual (Page 29)

Operating the VP-885
25 25
To set the gain level of an input or output:
1. To enter the audio gain setting mode, do either of the following:
 Press either of the Audio Level buttons and press the required INPUT
or OUTPUT SELECTOR button
 Press the required INPUT or OUTPUT SELECTOR button.
If an OUTPUT is pressed, the display indicates which OUTPUT is
selected by flashing the selected number. In this example, OUTPUT 8
is selected (see Figure 19 )
Figure 19: Status Display OUTPUT 8 Flashing
2. Press either the plus (+) button to increase, or the minus (–) button to
decrease the current gain level setting.
The display changes to indicate (see Figure 20 ):
 whether an INPUT or OUTPUT is selected (in this example, OUTPUT)
 which channel number is selected (in this example, 8)
 the current gain setting (in this example, -4.5)
Figure 20: Status Display Showing OUTPUT 8, Gain -4.5
3. Press either the (+) button to increase or the minus (–) button to increase
or decrease respectively the gain level setting.
The display changes accordingly.
4. Press either the Audio or Video button to exit the gain level setting mode.
If no button is pressed for 10 seconds, the VP-885 automatically exits the
gain level setting mode and the display reverts to normal operation.
The factory default audio gain is set to 0dB. An audio gain value of 0dB
indicates that the output signal value is identical to the input signal value.