Kramer Electronics VP-460 - Manual (Page 44)

VP-460 - Controlling the VP-460 39
39
7.3 Controlling via the Infrared Remote Control Transmitter
This IR remote control transmitter is compatible with various Kramer
machines, therefore not all its buttons are applicable to the
VP-460.
The table below defines buttons that are relevant to the VP-460; the
functionality of the other buttons is marked N/A.
You can control the VP-460 from the infrared remote control transmitter:
Figure 23: Infrared Remote
Control Transmitter
Keys Function
POWER Toggle the power save mode ON or OFF
PIP Enter the dual window mode (the latest
setting), see Section 6.2
BLANK Toggle between a blank screen, black
screen and the display (for both windows)
FREEZE Freeze/unfreeze the output video image
(for both windows)
M
A
IN
S
our
ce I
np
ut
s
HDMI1 N/A
HDMI2 N/A
DP N/A
PC1 Select the UXGA input
PC2 N/A
SDI Select the SDI input
CV1 Select the composite video input
CV2 N/A
YPbPr N/A
Press ENTER to access menu levels
(right arrow)
Use the up and down arrows to adjust
numerical values and adjust the output
volume level (when not within the OSD)
MENU Enter/Exit the OSD menu and return to
the previous menu level
MUTE Toggle between muting (blocking out
the sound) and enabling the audio
output
P
IP
S
our
ce I
np
ut
s
HDMI1 N/A
HDMI2 N/A
DP N/A
PC1 Select the UXGA input
PC2 N/A
SDI Select the SDI input
CV1 Select the composite video input
CV2 N/A
YPbPr N/A
LOCK Lock the front panel buttons
RESET to
XGA/720P
Press and hold to reset 720p
i