Kramer Electronics VP-460 - Manual (Page 20)

VP-460 - The OSD Menu 15
15
Figure 4: Select the Display Mode
5.2.1 Window Customization
Window customization lets you change the position and size of a selected window.
Make sure that you have control over the window that requires customization (Main
Window Control or PiP Window Control). If not, select it via the OSD item in the
Miscellaneous menu, see
Section 5.8
Note that if the VP-460 is set to the single window display mode, only the Main Window control
applies. If the VP-460 is set to any of the dual window display modes, you have to select
Main/PiP window control to move and/or resize the selected window.
.
In the following examples, PiP Window Control is selected, but the same procedure
applies to Main Window Control.