Contractor saw specifications – SawStop CNS175-AU User Manual
Page 81
SawStop 10” Contractor Saw 79
Overall saw dimensions (including the motor):
44” w x 39
1
⁄
4
” d x 34
3
⁄
4
” h (table saw only)
58
1
⁄
2
” w x 40” d x 34
3
⁄
4
” h (w/ Contractor Fence Assembly)
69
1
⁄
8
” w x 41” d x 34
3
⁄
4
” h (w/ T-Glide Fence System & 36” rails)
85
1
⁄
4
” w x 41” d x 34
3
⁄
4
” h (w/ T-Glide Fence System & 52” rails)
Cabinet footprint:
25
3
⁄
4
” w x 27” d
Cast iron table:
20” w x 27” d, 44” w x 27” d (w/ extension wings)
Extension wing:
12” w x 27” d
Extension table (optional):
19
3
⁄
4
” w x 27” d (36” rails), 35
3
⁄
4
” w x 27” d (52” rails)
Weights (approx.):
225 lbs (table saw only)
245 lbs (w/ Contractor Fence Assembly)
310 lbs (w/ T-Glide Fence System, 36” rails & table)
335 lbs (w/ T-Glide Fence System, 52” rails & table)
35 lbs (optional cast iron extension wing)
Shipping weight (approx.):
240 lbs (table saw only)
Blade:
40-tooth, professional grade,
5
⁄
8
” arbor
Blade diameter:
10”
Blade tilt:
Left
Blade kerf:
3 mm
Blade plate thickness:
2 mm
Max. depth of cut, blade at 0º:
3
1
⁄
8
”
Max. depth of cut, blade at 45º:
2
1
⁄
4
”
Max. rip, right of blade:
30
1
⁄
2
” (w/ Contractor Fence Assembly)
36
1
⁄
2
” (w/ optional 36” rails)
52
1
⁄
2
” (w/ optional 52” rails)
Max. rip, left of blade:
16
1
⁄
2
” (w/ Contractor Fence Assembly)
12
1
⁄
2
” (w/ T-Glide Fence System)
Dado diameter:
8” (requires a separate brake cartridge and table insert)
Dado max. width:
13
⁄
16
”
Arbor diameter at blade:
5
⁄
8
”
Main bearing size:
62 mm OD x 30 mm ID
Second bearing size:
52 mm OD x 25 mm ID
Table in front of blade (max. elevation):
10
5
⁄
8
”
Table behind blade (max. elevation):
7
1
⁄
8
”
Arbor Runout:
0.001” maximum allowable runout
Table Flatness Measured Diagonally:
0.016” maximum gap
Blade Alignment with Miter Slot:
0.010” maximum displacement
Deviation of Miter Gauge Indexing Stops
from actual angle:
±0.25º
Alignment between Spreader and Blade:
0.010” maximum difference
Miter slots:
T-shaped,
3
⁄
4
” at top, 1” at bottom,
3
⁄
8
” deep
Dust collection port diameter:
4”
Riving knife / spreader thickness:
2.3 mm
Blade guard:
polycarbonate, extends only 1” to right of blade
Standard Insert:
zero-clearance, steel core with ABS surface
Belts:
V-ribbed belt— motor belt is static dissipative
Handwheels:
6” diameter, cast aluminum with ABS handle
Motor Options:
1.75 hp, 60 Hz, dual voltage motor (model CNS175)
14A at 110-120V (pre-wired in this configuration)
or 7A at 208-240V
1.75 hp, 50 Hz, 208-240V (model CNS175-AU)
Contractor Saw Specifications