SawStop CNS175-AU - Manual (Page 59)

SawStop 10” Contractor Saw 57
Using
Your Saw
Using an Out-Feed Table
You should use an out-feed table to support your work when cutting pieces longer than approximately 4
feet. The out-feed table attaches flush against the back edge of your saw and prevents your workpiece from
dropping off the back of your saw during cutting.
The SawStop ® Out-Feed Table is designed specifically for use with the T-Glide TM Fence System - Professional
Series (see Fig. 73). It does not attach to the SawStop ® Contractor Fence Assembly.
You can learn more about the SawStop ® Out-Feed Table from an authorized SawStop distributor or at
www.sawstop.com.
Fig. 73
Using Your Saw