Goulds Pumps 3700 - IOM User Manual
Goulds Pumps Pumps
Table of contents
Document Outline
- Introduction and Safety
- Transportation and Storage
- Product Description
- Installation
- Preinstallation
- Baseplate-mounting procedures
- Install the pump, driver, and coupling
- Pump-to-driver alignment
- Alignment checks
- Permitted indicator values for alignment checks
- Alignment measurement guidelines
- Attach the dial indicators for alignment
- Pump-to-driver alignment instructions
- Perform angular alignment for a vertical correction
- Perform angular alignment for a horizontal correction
- Perform parallel alignment for a vertical correction
- Perform parallel alignment for a horizontal correction
- Perform complete alignment for a vertical correction
- Perform complete alignment for a horizontal correction
- Grout the baseplate
- Piping checklists
- Commissioning, Startup, Operation, and Shutdown
- Preparation for startup
- Remove the coupling guard
- Check the rotation - Frame Mounted
- Couple the pump and driver
- Shaft sealing with a mechanical seal
- Connection of sealing liquid for mechanical seals
- Pump priming
- Start the pump
- Pump operation precautions
- Shut down the pump
- Make the final alignment of the pump and driver
- Dowel the pump casing (optional)
- Maintenance
- Maintenance schedule
- Bearing maintenance
- Mechanical-seal maintenance
- Disassembly
- Preassembly inspections
- Reassembly
- Assemble the power end
- Assemble the frame
- Install the optional water-jacket cover
- Install the seal-chamber cover
- Install the cartridge-type mechanical seal and seal-chamber cover
- Determining impeller spacer thickness (applicable for 3703/3700LF)
- Install the impeller (3700/3710)
- Install the impeller (3703)
- Install the impeller (3700LF)
- Install the coupling hub
- Install the back pull-out assembly in the casing
- Post-assembly checks
- Assembly references
- Troubleshooting
- Parts Listings and Cross-Sectionals
- Local ITT Contacts