Pitco Frialator I12+ Cooking Computer for ROV Fryers - Manual (Page 26)

Solstice I12+ Cooking Computer for ROV Fryers
Pitco P/N 60149517 & 60149518
L20-414 Rev 2 Page 26 of 32
8.11.2 Maximum JIB Time
This adjustment selects the amount of oil in terms of “pump time” for a full JIB. Factory default
– 1:30.
 With display showing , press product key [2].
 Display shows , where m:ss is the time the reset value
for a new JIB.
 To change this value, use the product keys for numeric entry of a new value. Acceptable
entry range is 0:00 to 4:00.
 Press the key to save entry.
 Display returns to .
8.11.3 Low JIB Time
This adjustment selects the amount of oil remaining in terms of “pump time” for a low JIB.
Factory default – 0:20.
 With display showing , press product key [3].
 Display shows , where m:ss is the time remaining when
“LOW JIB” is displayed.
 To change this value, use the product keys for numeric entry of a new value. Acceptable
entry range is 0:00 to 4:00.
 Press the key to save entry.
 Display returns to .
8.11.4 JIB Monitor (Check/Fault) Enable
This selection allows the enabling and disabling of the JIB monitor for error conditions
feature.
 With display showing , press product key [4].
 Display shows , where xxx is either ON or OFF.
 Use product key [0] change value. Press the to save choice.
 Display returns to .
8.11.5 Filter Return Key Enable
This selection allows the enabling and disabling of the Filter Return key for manual filter
configurations.
 With display showing , press product key [5].
 Display shows , where xxx is either EN or DIS.
 Use product key [0] change value. Press the to save choice.