Pitco Frialator Pasta/Rethermalizer Digital Controller - Manual

If display shows "LOC" Press then , This will unlock the
programming function and allow changes to be made to settings
Press , Display will show "Pr09" (Program) the indicator lights above both
Press or , Display will show "XX" (XX = current timer setting) Indicator
above or function key will illuminate to indicate which (left or right) timer is
being programmed
Press the or function keys to change set time
Press to save new timer setting
Press to exit programming
Press , Display will show "LOC or Pr09" (Program)
Press to turn controller ON
Press and hold for 3 seconds to turn controller OFF
Press to start LEFT timer/basket lift
Press to start RIGHT timer/basket lift
Press , Display will show "BOIL or SIM" Note: Simmer mode runs at 190 F
Press until display shows desired selection
Press for programming mode
PASTA COOKER AND RETHERMALIZER DIGITAL
CONTROLLER PROGRAMMING INSTRUCTIONS
CONTROLLER FUNCTIONS
TIMER PROGRAMMING INSTRUCTIONS
ENTERING LEVEL 1 PROGRAMMING
*
*
*
*
*
*
*
*
P P
P P
ON
OFF
L BASKET/ TIMER
R BASKET/ TIMER
BOIL SIMMER
PROGRAMMING
and functions key will illuminate.
*
*
*
*
*
*
P P
P P
P P
PASSWORD
TIMER SET
SECTION 4.0
PROGRAM
KEY
TIMING
START/STOP
KEYS
L20-278 rev 0