Pitco Frialator I12+ Cooking Computer for ROV Fryers - Manual (Page 20)

Solstice I12+ Cooking Computer for ROV Fryers
Pitco P/N 60149517 & 60149518
L20-414 Rev 2 Page 20 of 32



7.3 Beeper Volume and Tone:
Volume and Tone of the beeper alarm may be changed in this section. Volume ranges are 1,2 and
3, where 3 is the loudest setting. This model also has a selection for tone.
With display showing , press the product key [0].
 Display will show . Press product key 3, display shows
[VOLUME n] [BEEPER].
 Use the product key [0] to scroll through choices (n= 1,2,3, or T). Beeper volume will
change as each selection is made.
 Press key on 1, 2, or 3 to save volume choice. Display shows .
 Press key on “T” to set tone – an additional display is shown, [TONE n] [BEEPER]. Use
the product key [0] to scroll through choices (n= 1,2,3). Beeper tone will change as each
selection is made.
 Press key on to save tone choice. Display shows .
7.4 Language Selection:
With display showing , press the product key [0].
 Display will show .
 Press product key 4, display shows [ENGLISH] [LANGUAGE].
 Use the product key [0] to scroll through choices (ENGLISH, ESPANOL, FRANCAIS,
DEUTSCH, HOLLAND).
 Press key to save choice. Display shows .
7.5 Melt Cycle Type:
This adjustment allows selection of the melt cycle type and requirement when starting the
appliance from a cold start.
With display showing , press the product key [0].
 Display will show .
 Press product key 5, display shows [LIQUID], the default setting.
 Use the product key [0] to scroll through choices (liquid, solid, or, no melt).
 Press key to save choice. Display will again return to .