Pitco Frialator I12+ Cooking Computer for ROV Fryers User Manual
Page 13
Solstice I12+ Cooking Computer for ROV Fryers
Pitco P/N 60149517 & 60149518
Page 13 of 32
L20-414 Rev 2
2.4.6
Right Manual Top-Off (Split Vat Only):
While in the advanced oil handling menu, press product key [5].
Display shows
.
Press and hold product key [5] to manually add fresh oil to the vat.
Display will show
while product key [6]
is held down.
Release product key [6] to stop adding fresh oil.
Press key
to exit the menu or select a product key [L-5] to
perform another action.
3
Control Filter Lockout (CFL):
This computer includes the Cook Count-based Control Filter Lockout (CFL) function which enforces
operator compliance with regularly scheduled filtering based on the number of cooks performed
since the last filter.
Performing any automated oil filter operation will reset the cook counter. Also, any manual
operation that includes the opening of the drain valve for 20 seconds or more will also reset the
cook counter. The cook counter may be reset at any time, where the computer does not have to
be in a Filter Soon or Filter Now state.
To check the current remaining cooks available before Filter Lockout, press the
key until
the Cooks Remaining message
is shown. Press the
key again to show
the maximum number of cooks allowed
–
.
3.1
Filter Soon:
Filter Soon message
will show when the number of cooks since the last filter
operation is greater than the Cook Counts Allowed value (section 8.6). It is suggested to
perform a filter operation when business levels permit.
The
message will not be viewable if there are active cook timers.
Additional cooks are allowed when in Filter Soon state.
3.2
Filter Now:
Filter Lockout messages
or
will show on the
displays when the number of cooks since the last filter operation is equal to the sum of the
Cook Counts Allowed value and the Cook Counts Deferred value (section 8.7). It is required to
perform a filter operation at this time.
The
message will display when the final allowed cook has been
completed. Perform the required filtering when this cook completes.
When in the Filter Lockout state, cooks are no longer allowed and product key presses
are ignored.