Avaya M7310 - Manual (Page 7)

M7310 Telephone User Guide Page 7
- Issue 02a (03 October 2011) IP Office
Telephone Overview: M7310 Telephone
1. Telephone Overview
1.1 M7310 Telephone
On IP Office, the M7310 telephone is supported by IP500v2 IP Office systems running IP Office Release 7.0 and higher
software. This guide is for IP Office Standard Version mode, separate user guides exist for other IP Office operation
modes.
10/22 14/26 18/30
11/23 15/27 19/31
12/24 16/28 20/32
13/25 17/29 21/33 Shift
Display
Release Feature
Hold SK1 SK2 SK3
1 2 3 Do Not Disturb 09 04 Conference
4 5 6 Transfer 08 03 Last Number Redial
7 8 9 Call Forwarding All 07 02 Call
* 0 # Group Pickup 06 01 Call
– Volume + Page Group 05 Spk
An option BLF module can be attached to a M7310 phone. The module provides status lamp indication for buttons 10 to
33.
The bottom right button is fixed as a Handsfree speaker button. This can be used to answer calls handsfree on the
phone's speaker (or headset if the phone has a headset connected).
1.2 Which Telephone System?
The IP Office telephone system can operate in a number of modes. This guide is for a system operating in IP Office
Standard Version mode.
To check what system you are one, press Feature 9*80. If your system is a IP Office Standard Version system, you will
hear an error tone. The display will show Invalid. If otherwise, the display will show the software level of the non-IP
Office Standard Version mode system. Contact your system administrator to obtain the appropriate M7310 user guide.
69 68
71 70
68 74
70 74
70