Auerswald 2500 - Manual (Page 99)

Use of the Telephone and PBX System
Ringer Signal
99
Ringer Signal
The system telephone signals inbound calls as follows:
ț Acoustic ringer signal (the telephone rings in the configured ringer melody; page 170 )
ț Display message (text)
ț Flashing LED on top of the hook key
ț Display backlight ( page 159 )
ț Flashing display backlight ( page 100 )
Switch on/off acoustic Ringer Signal
If the surrounding must not be disturbed by the ringing of the telephone, you can switch off
the ringer signal. This function is different from the PBX function “Do-not-Disturb” (
page 103 )
insofar that inbound calls are still possible. But they are not signalled acoustically anymore
but visually only.
Use the Function via Function Menu:
Assign Key:
Open the function menu for the function “ringer
tone” (You will find help on
page 33 and the
following).
functions
ringer tone
The icon marks the current
setting.
Press the softkey to the left of the option
you require:
ț activating: Switch on the acoustical ringer
signal.
ț switching off: Switch off the acoustical
ringer signal.
...
Open the key programming menu for the func-
tion “ringer tone” (You will find help on
page 33
and the following).
define keys
function key ...
... level
ringer tone