Auerswald 2500 User Manual
Page 59
Make a Call
Outbound Call
59
Nobody takes the Call on the called Telephone - Start Recall
You can only use this function for external calls if the ISDN service attribute “Recall on no
reply (CCNR)” has been activated by the network provider.
The external connection must meet the technical requirements for an automatic recall. For
example: The automatic recall to a PTP connection is not supported by each network pro-
vider.
An automatic recall is processed up to 45 minutes in the public exchange. If the subscriber
you like to talk with did not finish his call until then, the automatic recall will be cancelled auto-
matically. If you do not pick up the receiver in time (you are called for 15 seconds), the auto-
matic recall will also be cancelled.
Nobody takes the call on the
called telephone.
recall
Press the
softkey to start automatic recall.
If the recall has been activated,
you get the message “recall ac-
tivated”.
B
Hang up the receiver.
As soon as the telephone was
used, you would be called by
the central office/PBX.
A
Pick up the receiver to initiate the recall.
or
reject
Press the
softkey to reject the recall.
If you have pick up the re-
ceiver, the subscriber is called.
☞
Important
☞
Advice