Auerswald 2500 - Manual (Page 214)

Configure and use the Answering Machine
Configure Message Forwarding
214
Configure Target for the Message Forwarding
Here you can enter the external telephone number that will be used as target to forward the
messages.
Please enter the external telephone numbers always with an exchange line access number
“0”. (Exception: Direct Exchange Line Telephone; see
page 56 .)
If the telephone book key is pressed when entering the telephone number, you can select the
requested telephone number in the telephone book.
Configure Delay Time for the Message Forwarding
Here you can define after how many seconds the latest recorded message will be forwarded
automatically.
The following entries are possible:
ț 0...99: 0-99 seconds
Open the settings menu for the setting “for-
warding target” (You will find help on
page 33
and the following).
settings
answer.machine
forward.target
N
telephone number
Enter the external target telephone number.
Press the softkey to complete the entry.
[ ]
☞
Important
☞
Advice
Open the settings menu for the setting “for-
warding time” (You will find help on
page 33
and the following).
settings
answer.machine
forwarding time
N
time in seconds
Enter the delay forwarding time between
recording of a new message and start of the
forwarding.
Press the softkey to complete the entry.
[ ]