Auerswald 2500 - Manual (Page 106)

Use of the Telephone and PBX System
Subscriber Function of the PBX
106
Room Monitoring
If you like to monitor the acoustics of a room e.g. in order to check whether your toddler
sleeps, you will be able to use the function “room monitoring”. The telephone in the room will
have to be properly configured for this function.
Then you call the configured telephone from another internal telephone. The connection will
immediately be established and you can listen into the room.
Use the Function via Function Menu:
Assign Key:
Use Function via Key (only in the idle State of the Telephone):
By pressing the key the room monitoring is switched on.
LED Signalling next to the Key:
The microphone of the base module switches on automatically.
How to listen into the room from an external telephone can be learned from the user manual
of the PBX.
By pressing the hook key or by taking the receiver and then hang up the room monitoring will
be deactivated.
Open the function menu for the function “room
monitoring” (You will find help on
page 33 and
the following).
functions
room monitoring
activating
Press the softkey to the left of the option
activating to start room monitoring.
Open the key programming menu for the func-
tion “room monitoring” (You will find help on
page 33 and the following).
define keys
function key ...
... level
room monitoring
Press the softkey to complete the settings.
red The room monitoring is switched on.
off The room monitoring is switched off.
☞
Advice