Number memory and busy status overview – Auerswald 2500 User Manual
Page 118
Use of the Telephone and PBX System
Number Memory and Busy Status Overview
118
Number Memory and Busy Status Overview
Key for Exchange Line Selection and Busy Status Overview
17
With a key correspondingly programmed an exchange line selection can be started. The LED
near the key informs you on the corresponding S
0
port busy status.
Assign Key:
Use Function via Key (only in the idle State of the Telephone):
By pressing the key an exchange line is selected. Then an external telephone number (with-
out exchange line access number) can immediately be dialled.
LED Signalling next to the Key:
17
Only when operated on the PBX systems COMpact 2204 USB, COMpact 2206 USB, COMpact 4406
DSL, COMpact 4410 USB and COMmander Basic.
When operated on the PBX systems COMpact 5010 VoIP, COMpact 5020 VoIP, COMmander Basic.2
and COMmander Business see
Open the key programming menu for the func-
tion “exchange line” (You will find help on
and the following).
define keys
function key ...
... level
exchange line
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on
ț
[name]: Allows to select the exchange line
by its name.
Press the
softkey to complete the settings.
red
Both B channels of the S
0
port are busy.
yellow
One B channel is still available. By pressing the key you can allocate the still
available connection.
off
The S
0
port is free. By pressing the key you can allocate one of both availa-
ble connections.