Karcher IV 100 - 55 M B1 - Manual (Page 46)

46 English 5.906-587.0 Rev. 00 (05/14)
Ball tap Material Part no.
Ball tap with lever handle 2". chrome-plated 9.980-036.0
Hose clamps Ø in mm Part no.
40 - 60 6.902-167.0
60 - 80 6.902-176.0
70 - 90 9.979-971.0
90 - 110 9.979-972.0
110 - 130 9.979-973.0
Hose suspension for vacuuming point Nominal Ø Installation type Part no.
Hose suspension with limit switch 3 SE 2 200-
0C for starting the vacuuming point by hose re-
moval. Pipe installation for DN80 pipes or wall
mount.
For hose diameter 40, 50 and 70. DN 42 Pipe installation 6.902-003.0
DN 52 Pipe installation 6.902-004.0
DN 72 Pipe installation 6.902-008.0
DN 42 Wall mount 6.902-010.0
DN 52 Wall mount 6.902-012.0
DN 72 Wall mount 6.902-014.0
Shut-off gate valve for vacuuming point Nominal Ø Installation type Part no.
Shut-off gate valve for opening the vacuuming
point in three different designs. Manual without
limit switch, manual with limit switch starts the
vacuum cleaner and electro-pneumatically
starts the vacuum cleaner. DN 52 Hand-operated without limit switch 6.902-020.0
DN 72 Hand-operated without limit switch 6.902-027.0
DN 52 Hand-operated with limit switch 6.902-019.0
DN 72 Hand-operated with limit switch 6.902-025.0
DN 52 Electro-pneumatic 6.902-028.0
DN 72 Electro-pneumatic 6.902-032.0