Karcher IV 100 - 55 M B1 - Manual (Page 17)

English 5.906-587.0 Rev. 00 (05/14) 17
1 "Reset" button
2 "Print" button

With the "Reset" button all data is deleted.
 An overview can be printed via the "Print" button.
The overall pressure loss is aligned with the vacuum
cleaner characteristic to determine the actual volume flow.
In the shown example, an overall pressure loss of 27 mbar
was reached. With this value the volume flow of the vacu-
um cleaner is still 468 m³/h.
It must be checked with the calculation tool which air
speed is reached with this volume flow and the given pipe
diameter. If it is below the required value, either a vacuum
cleaner with more power must be chosen or the pipeline
must be redesigned.
10.2 Addition of the sections
10.3 Alignment with vacuum cleaner characteristic