ROTHENBERGER ROSCOPE 1000 Set TEC 1000 - Manual (Page 29)

ENGLISH 27
13. Accessories
Accessory Name Rothenberger Part Number
Replacement Standard Imager 6.9601
Hook Magnet and Mirror 6.9615
Replacement Battery 6.9618
Replacement Battery Charger 6.9619
Headset 6.9616
¼“ mono mini plug cable external monitor 6.9617
14. Storage
1. Unit should be cleaned prior to long term storage
2. Store in a cool dry location
3. Battery should be removed during storage to promote battery life.
15. Battery and Charger
1. Only use provided battery and charger
2. Operating temperature. Do not use charger below 0°C (32°F) and above 40°C (104°F)
3. Inspect Battery and Charger before usage, do not use if there is any physical damage.
Contact the Rothenberger Service Center.
4. Do not insert battery into charger if charger has been dropped or damaged in any way.
5. Proper ventilation required
6. Use an appropriate power source.
7. Recommended to unplug charger when not in use or when being cleaned.
8. The battery and charger are not serviceable parts, contact your local Rothenberger Service
Center for repairs.
9. Do not charge battery pack in damp, wet or explosive environment.
10. Properly dispose of the battery
11. Avoid contact with fluids seeping from a defective battery.
15.1 Description, Specifications and Standard Equipment
The ROSCOPE 1000 Battery Charger (Catalog Number 6.9619), when used with appropriate
battery packs (Catalog Number 6.9618) listed in the Accessories section, is designed to charge a
3.7V Lithium Ion battery in approximately 4-5 hours.
Figure 38– Battery and Charger