ROTHENBERGER ROSCOPE 1000 Set TEC 1000 - Manual (Page 24)

22 ENGLISH
10.1 Using the Camera and Scanner Wizard to Transfer Images to a Computer
1. Use the USB cable to connect the Rothenberger handheld device to the computer as
shown in Figure 28.
2. Plug the USB cable into the ROSCOPE 1000 inspection device (Figure 9), and the computer.
3. Power the device ON, a splash screen saying “USB Connected” will appear on the LCD
screen.
4. When the following screen is displayed on the computer. Select “Copy pictures to a folder
on my computer.”
Figure 29– Copy Pictures Window
NOTE: This will only happen provided you have pictures saved on the handheld device (or SD
card).
Figure 30– Scanner and Camera Wizard
5. When the prompt in Figure 30 appears, click “next”.