ROTHENBERGER ROSCOPE 1000 Set TEC 1000 User Manual

Page 21

ENGLISH

9.13 Pan/Zoom and Brightness Mode for live image

Refer back to section 9.4 for screen navigation architecture, the menu screen necessary to change

this feature is shown in Figure 22 below.

Figure 22 – Pan/Zoom [Live Image] Menu Setting

Use the

buttons to change the setting. Press the

button two times to exit into live

mode. You will notice that in the live image, the icon at the bottom left of the screen will display

the mode that the device is currently set to (see Figure 23).

In LED / Zoom Mode the

buttons will change LED brightness and the

buttons will control the zoom level.

In Pan Mode the

buttons allow the user to move the picture around on

the LCD display.

NOTE: You may witness black regions around the perimeter as the live image moves within the

LCD. For maximum benefit of the Pan feature the device should be fully zoomed in.

Figure 23 – LED-Zoom Mode / Pan Mode