ADTRAN ISU 512 - Manual (Page 66)

Chapter 5: Configuration
50 ISU 512 User Manual 61202.086L1-1
Videoconferencing equipment should be set for delayed second call dialing
when using the RS-366 Y cable for dialing 2-clear channel calls.
QUICK SETUP CONFIGURATION
To configure the DTE Options quickly and easily, the Quick Setup menu is
available to automatically set up the eight most common DTE configurations.
For fine-tuning a particular application and DTE settings, the section Setting
DTE Options in this chapter provides a step-by-step process for detailed con-
figuration of the DTE Options.
To aid in configuring the DTE options for the ISU 512, many common config-
urations are preset for Quick Setup. These include various dial, leased, and
video options. Use the following menu path to access Quick Setup options:
3=CONFIG
4=Quick setup
1=Dial 512K
2=Dial 384K
3=Dial 448K
4=Dial 336K
5=Video 384K
6=Video 336K
7=Leased Slave
8=Leased Master
9=Ldm SlvMstr
Dial 512K
When the ISU 512 is configured for Dial 512K service the following parame-
ters are automatically preset:
Service type ISDN dial line
Automatic answering Enabled
ISDN call type 64 kbps data
Dial options Front Panel
Maximum bit rate 512 kbps
DTR options Ignore
RS-530-V35 cable Disabled
RS-366-Y cable Disabled