ADTRAN ISU 512 - Manual (Page 59)

Chapter 5: Configuration
61202.086L1-1 ISU 512 User Manual 43
Connector Type
Specify the interface by selecting the desired connector type. Use the follow-
ing menu path to select the connector type.
3=CONFIG
2=DTE options
2=Connector Type
1=RS-530
2=V.35 (default)
RS-530 to V.35 Cable
The RS-530 to V.35 cable (part number 1200072L1) must be enabled for some
dual-port applications, such as videoconferencing. Setting this option to En-
abled allows the use of the RS-530 to V.35 cable. This cable converts the RS-
530 connector to a V.35 interface. Use the following menu path to enable/dis-
able the RS-530 to V.35 cable.
3=CONFIG
2=DTE options
3=530-V35 Cable
1=Enable
2=Disable (default)
RS-366 Y Cable
Setting this option to Enabled allows the RS-366 port to use the RS-366 Y cable.
The RS-366 Y cable (part number 1200120L1) is used for dual-port video appli-
cations. Use the following menu path to enable/disable the RS-366 Y cable:
3=CONFIG
2=DTE options
4=RS366-Y Cable
1=Enable
2=Disable (default)