Packing list – Swiftech H20 X20 EDGE SERIES User Manual
Page 2
Copyright Swiftech 2010
– All rights reserved – Last revision date: 8-17-10 - Information subject to change without notice – URL
Rouchon Industries, Inc., dba Swiftech
– 151 West Victoria Street, Long Beach, CA 90805 – Tel. 310-763-0336 – Fax 310-763-7095 - E Mail: [email protected]
2 of 16
Packing List
QTY
ITEM
1
APOGEE™ XTL water-block, including socket 1366, socket 1156 and socket 775 hold-down plates for all
Intel Core® desktop microprocessors, (2)
½” chrome plated hose barb fittings, (2) hose clamps, and
Arctic Céramique thermal compound
Important note: Free Upgrade available (see terms and conditions) for AMD® socket 754, 939, and AM2,
as well as Intel® socket 771 (Xeon series) Server form factor
1
MCR220-DRIVE Radiator-pump assembly, including (2) pre-installed 120mm fans with fan guards, (2)
½” chrome plated hose barb fittings, (2) 12v to 7v adapters, (2) 12v to 5v 3-pin to 4-pin Molex adapters,
and (2) hose clamps.
OR (depending on model)
MCR320-DRIVE Radiator-pump assembly, including (3) pre-installed 120mm fans with fan guards, (2)
½” chrome plated hose barb fittings, (3) 12v to 7v adapters, (3) 12v to 5v 3-pin to 4-pin Molex adapters,
and (2) hose clamps.
1
MCB-120 Radbox, with mounting hardware
& 3/8” PCI pass thru bracket
1
Grommet and cap for optional fill-port case mod.
1
Set of (4) corner braces and screws for alternate radiator mount #1
1
Set of short (6-
32 x 3/8”) radiator installation screws and snap-rivets, for alternate radiator mount #2
6
Feet 1/2
” industrial grade PVC tubing
1
2 Oz. Bottle of HydrX concentrated coolant and funnel
Warning!
The
Apogee™ XTL water-block included with your kit is compatible with all the most popular
processors available on the market. In an effort to cut on waste however, some of the less popular
mounting mechanisms have not been physically included in the kit and are available for free on
demand. They are:
Hold-down plate for Intel® legacy server platforms (socket 771, Xeon)
Hold-down plate for AMD® socket 754, 939, F and AM2/AM3
If you own one of the above platforms, all you have to do is contact customer support and the part
will be shipped to you at no charge by express mail or equivalent. The following terms and
conditions apply:
Worldwide except EEC and Australia:
Please email within 90 days of your date of purchase (proof of purchase required), call, write or Fax
to Swiftech customer service at:
TOLL FREE (Continental US only)
1-888-85SWIFT (1-888-857-9438)
Mailing Address Swiftech
151 West Victoria St.
Long beach, CA 90803
USA
Telephone
310-763-0336
Fax
310-763-7095
within 90 days of your date of purchase (proof of purchase
required)
Australia: Please email
within 90 days of your date of purchase (proof of
purchase required)