Allied Telesis AT-8350GB User Manual

Page 79

AT-8350GB Installation Guide

3. Set the terminal or the terminal emulation program to the following

settings:

Emulation mode: VT100

Baud rate: 9600

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

Key mode: Terminal keys

Note
These are the default settings for the RS-232 Terminal Port. They are
for a DEC VT100 or ANSI terminal or an equivalent terminal
emulation program.

When the terminal session starts, it displays the management software’s
login prompt, shown in Figure 34. Enter the login name and password.
The default login name and default password are both “manager.” For
instructions on how to change the password, refer to the AT-S41
Management Software User’s Guide for the AT-8350GB Switch.

Figure 53 AT-S41 Login Prompt - Local Management Session

AT-8350GB Management System Version 1.00F
Local - Console
Allied Telesyn International Corp.
Copyright, 2001
==================================================