Allied Telesis AT-8350GB - Manual (Page 56)

Installation
56
Unpacking the Switch
To unpack the switch, perform the following procedure:
1. Remove all components from the shipping package and store the
packaging material in a safe location.
Note
You must use the original shipping material if you need to return
the unit to Allied Telesyn.
2. Place the switch on a level, secure surface.
3. Make sure the following hardware components are included in your
switch package. If any item is missing or damaged, contact your Allied
Telesyn sales representative for assistance.
‰ One AT-8350GB Fast Ethernet switch
‰ Two mounting brackets
‰ Eight Phillips-head screws
‰ Four rubber feet
‰ Power cord (Americas, EC, Australia, and UK only)
‰ Null modem management cable
‰ One stacking cable
‰ Warranty card
‰ Two extra serial number stickers
‰ Two extra MAC address labels
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
S 49
M
S 50
M FAULT PWR RPS LINK
100
FULL
MODE
AT-8350GB