Allied Telesis AT-8350GB - Manual (Page 58)

Installation
58
Installing the Switch in a Rack
Perform the following procedure to install the switch in a standard 19-
inch rack. If you are not installing the switch in a rack, go to the next
procedure:
1. Attach a rack-mounting bracket to one side of the switch using four
of the screws that came with the switch. See Figure 23.
Figure 30 Attaching a Rack-mounting Bracket
2. Install the second rack-mounting bracket on the other side of the
switch using the four remaining screws.
3. Mount the switch in a19-inch rack using standard screws (not
provided).
Figure 31 Installing the Switch in a Rack
4. Ensure that the switch is installed straight and level.
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
S
49
M
S
50
M