Installing the at-rps2004 unit – Allied Telesis AT-8350GB User Manual

Page 74

Installation

Installing the

AT-RPS2004

Unit

Note
Make sure you install the redundant power supply close enough to
your switch so that you can connect all power cords to the switch
and to the power outlet. We recommend that you install the
redundant power supply directly above or below your AT-8350GB
switches or in a directly adjacent rack.

Perform steps 1 to 6 in the following procedure to install the optional
AT-RPS2004 redundant power supply unit in a standard 19-inch
equipment rack. If you are not installing the power supply in a rack, go to
step 7.

1. Unpack the AT-RPS2004 power supply from its shipping container

and store the packaging material in a safe location.

Note
You must use the original shipping material if you need to return
the module to Allied Telesyn.

2. Check that the package includes all the items listed below. If any item

is missing or damaged, contact your Allied Telesyn sales
representative for assistance.

One RPS2004 Redundant Power Supply

Power cord (Americas, EC, Australia, and UK only)

RPS cable

Installation Guide

Warranty card

FAN

RPS